Scotts® EvenGreen Drop Fertiliser Spreader
Size: EA
Main product features
Spreading granular fertilisers over the lawn has never been easier. Scotts fertiliser spreaders are designed to make the task accurate, clean and simple - no more dipping your hands into bags of fertiliser, no more risk of burning the lawn with hit and miss broadcast applications. The Scotts EvenGreen Drop model is perfect for medium to large lawns
When to use
FEATURES
- Because of the spreader's drop action, fertiliser is unlikely to come into contact with concrete or paving, not is it flung into adjacent garden beds
- Made from durable materials and with sturdy wheels
- Comes boxed, with a full set of instructions on how to assemble
- Fertiliser hopper holds up to 4kg of Scotts Lawn Builder fertiliser
- Check the spreader setting on the Scotts Lawn Builder bag and adjust accordingly using the simple adjuster
SUITABLE FOR
- Application of all Scotts Lawn Builder Slow Release Lawn Fertilisers
- The preferred spreader for applying Scotts Lawn Builder + Weedkillbecause there's minimal risk of fertiliser being inadvertently spread into adjacent garden beds
NOT SUITABLE FOR
- Not recommended for use with powdered fertilisers - the spreader may clog and break
- Not recommended for spreading lawn seed unless it is thoroughly mixed with a granular lawn starter fertiliser
HOW IT WORKS
- Scotts EvenGreen Drop Spreader has a drop bar beneath the fertiliser hopper that turns with the axle. This bar has rows of granule-sized indentations along it that are filled from the hopper as it turns. It delivers granules in rows immediately under the spreader as it is wheeled along
- The most efficient way to feed the lawn because all of the fertiliser is delivered directly on to the lawn
HOW TO USE
To work out how much fertiliser you should put into the spreader:
- Calculate the area of the lawn in square metres by multiplying the length by the width (1 large stride = 1 metre approx)
- The area multiplied by the application rate will give the exact amount of Scotts Lawn Builder you need. You will find the recommended application rate on the pack
- Use a set of scales to weigh it out and then add it to the spreader ready to apply - do not be tempted to add a 'bit extra for luck' because over-application may result in nitrogen burning
- Select the correct spreader setting listed on the product bag
- Walk steadily pushing the spreader while also squeezing the trigger on the handle. Release trigger at the end of each pass
- To obtain even coverage, spread half the required amount in a north-south direction, then the other half in an east-west direction
| As a Guide | m2 |
|---|---|
| 1/4 Tennis court | 65 |
| 1/2 Tennis court | 130 |
| Full Tennis court | 260 |
For a complete guide on How to Use Scotts EvenGreen Drop Spreader, watch the video on this page and always check the packaging
WHEN TO USE
- Always use a spreader when applying Scotts Lawn Builder Slow Release Lawn Fertilisers
SAFETY INFORMATION
CAUTION: Using this product to apply Scotts Lawn Builder fertiliser may spread granules on to paths, paving, driveways, etc. Wherever possible, avoid fertiliser contact with hard surfaces (product may cause staining) but if contact does occur, sweep off immediately
SAFETY FIRST: Read the instructions on the product packaging before use and take particular note of any warnings or cautions on the label
TECHNICAL DETAILS
Designed and calibrated to specifically suit Scotts Lawn Builder Slow Release Lawn Fertilisers. We cannot guarantee correct application rates if used with other brands and types of lawn food.
MANUAL
